The best WiFi repeaters for home

In this post we will try to describe which are the best WiFi repeaters of 2, 4Ghz to share the internet in 2018

Summary

  1. Introduction
  2. Antenna panel + WiFi Router with USB
    1. OpenWRT Router with USB
    2. Router Alfa 25H
  3. CPE outside as access point or WIFi client
    1. Ubiquiti nanostation Loco M2
    2. CPE Melon N828
    3. CPE Alfa Tube 2h
  4. Plug-in WiFi repeater
  5. Conclusion: Repeat the Internet always with direct vision

1-Introduction

If you want to repeat internet from one house to another, connect by WiFi two buildings or offices, or a friend wants to give you free internet surely you’ve wondered which is the cheapest and most effective way to repeat WiFi. In 2017 have been selling many very powerful WIFi systems that continue to use the technology of 2, 4ghz to bring a connection from one point to another. At this post we will explain in a simple way which are the antennas and router of 2, 4Ghz that you can install yourself in a homemade way and without resorting to complex installations. Thanks to this tutorial we hope to help you install a powerful WiFi relay, cheap and without resorting to technicians or installers of payment.

These long-range devices still use the 2.4 Ghz technology that has all these advantages:

  • WiFi N 2, 4Ghz is a cheap and easy to configure technology, plus it is 100% compatible with all WiFi standards
  • 2, 4Ghz is the most useful frequency for long range, has a range of reach greater than 5GHz.
  • It reaches 300Mbps speed that is enough to transmit the speed of the best optical fiber rates and for all kinds of Internet uses.

Currently the number of brands and models of chip adapters or WiFi antennas is very varied, so we have made a scheme to offer you the most practical and easy solution to install a WiFi repeater and you can buy safely and guarantee that is the Device you need at home.

2-Antenna panel + WiFi Router with USB

The most popular way to install a WiFi repeater Kit is to buy a bundle composed of a powerful WiFi antenna Melon N519 from 300Mbps with 10 meters of USB cable plus a OPENWRT router SILICEO repeater.

The antenna will do the job of receiving Internet at long distance (up to 2km) to then transmit the signal via USB cable to the OPENWRT router. This router takes the WiFi antenna drivers panel of the RT3070 and RT3072 chip so that when connecting the WiFi antenna to the router’s USB port quickly recognizes it and can repeat the signal.

With 300Mbps input and output this Internet repeater Pack router to 300Mbps with antenna Melon WIFI N519 chip RT3072 can be installed in any house, the antenna is outside and can be put in the window and the Router will create a new WiFi network inside home.

Reduced PRICE!   Wi-Fi repeater Kit with Antenna Panel…

In Stock.     75.81 EUR BUY NOW!!

2-1 OpenWRT Router with USB

Open-WRT router with USB WIFI antenna repeater 300Mbps Modleo SI3826 e Sun Router 300Mbps with four powerful 5dBi antennas. WiFi to the highest speed up to 300Mbps 2T2R WiFi N. Thanks to a USB connection and special firmware Openwrt with drivers for antennas and WiFi adapters powerful chip RT3070 RT3072 and RTL8187 RTL8188.

OpenWrt Barrier Breaker Router

In Stock-46.00 EUR buy NOW!!

2.2 Alfa Network AIP-W525HU with USB

The Alfa Network AIP-W525HU with USB and 2 removable SMA antennas is designed with a USB port that is compatible with USB-powered WiFi antennas. It works with all the models specified in the features such as the famous powerful antennas of Alfa AWUS036NHR and Alfa AWUS036NHV. You can work as a WiFi Internet relay at a long distance.

The USB port is compatible with WiFi USB adapters that carry Realtek chip RTL8812AU, RTL8188EUS, RTL8188RU, Ralink RT3572.
Alfa Network has designed this router to be compatible with the new models of Wifi Alfa adapters, both with the 2, 4ghz and dual-band USB antennas. One advantage is that you can feed both the 5v power adaptor and the PoE-type power adapter with an Ethernet cable as long as you need.

The model functions as an Extender/repeater or WiFi Repeater bridge compatible with all the following models of powerful Alpha antennas by USB: AWUS036NHR v2/AWUS036NHV/AWUS051NH v2/AWUS052NH/AWUS051NHS/AWUS051NH v2/AWUS036AC/AWUS036ACH/AWUS036EAC
It is also an ideal router to install it on the outside with USB cable and external USB WiFi adapters from Alfa Network: UBDO-NV/UBDO-NR/TUBE-UV/UBDO-25T
It is the ideal router to replace the old router Alfa R36.

Due to its characteristics, the Alfa Network AIP-W525HU router is ideal for campers, motorhomes and boats, since it allows you to put an external antenna in the caravan and the router inside to distribute the internet signal of the campsite, hotel or a port.

 Note: The USB port also accepts the compatible 3g/LTE and 4g USB modems that are in the table. It works with most of Huawei’s 3g or 4g Internet USB Modem, Vibo and ZTE. With this práctic Autilidad you can dock a USB modem of any telephony company such as Movistar, Vodafone, Orange or Yoigo and repeat Internet WIFI.

3-CPE outside as access point or WIFi client

A CPE WiFi by definition a local team working as Cleinte (Customer-premises equipment). The client mode is a function of the WiFi router that is used to receive a WiFi signal and transmit it by the router. Therefore a CPE is a router that can be installed on the outside to receive the WIFI signal as a client and at the same time distribute it as a router.

Below we show the three best types of CPE WiFI outdoor.

3-1 Ubiquiti nanostation Loco M2

The CPE wifi Ubiquiti nanostation Loco M2 Equipment has all the functions of a long-range WiFi antenna and a router. All integrated in a waterproof and cable-powered RJ-45 with PoE adapter 24v. Scope guaranteed by the brand of more than 5km outdoors in open spaces.

The Loco M2 WiFi antenna has a range of up to 15km from point to point 2.4 GHz. It can work like WISP which is the new technology of devices that work as providers of wireless Internet services. The WISP technology with Ubiquiti’s AirOS ® Versatile firmware enables high performance, multi-point outdoor networks. AirOS offers functions such as wireless configuration, bridge or router configuration and system management services.

Ubiquiti is the preferred brand of professional installers of WIFI CPE equipment. By est Emotive the home version Loco M2 is both powerful and professional and easy to install by any with knowledge of router configuration.

3-2 CPE Melon N828

It is a powerful 2.4 GHz outdoor CPE with 14dBi directional antenna. With the same configuration and design as the Loco M2 of Ubiquiti is a good cheap option to fulfill the role of CPE outdoor WIFI.

Weatherproof design, prepared to withstand outdoors.

The N828 is designed to work in an outdoor environment. Built with outdoor weatherproof housing and high temperature durability (-30 °c ~ 70 °c) inside hardware, the AP could work in a place with bad weather extremes. It is also resistant to sun and humidity, and prepared with electric anti-shock system.

The Melon N828 router is capable of being powered by an Ethernet cable to simultaneously send data and electricity wherever your AP can be located even up to 120m away. This function multiplies your options allowing you to place the AP in a position that is more convenient to get the best signal possible, such as on the wall or on the roof of your office.

One advantage is the system of degradation of the WIFI signal to travel over long distances which is mitigated by high sensitivity RX. Just as a loudspeaker increases the volume so that your WIFI sound travels farther, the CPE device makes the signal degradation when traveling long distances is mitigate by high sensitivity RX meaning that you can get a higher speed in Longer distances. This system works just like a high-sensitivity earpiece that allows the CPE to detect and receive the weakest signals.

MELON N828 CPE PoE 300mb WIFI AP Router

In Stock 48.00 EUR-BUY NOW!

3-3 CPE Alfa Tube 2h

The famous CPE WiFi Alfa Network Tube2H for outdoor is a router with PoE client. The TUBE2H is an outdoor bridge (AP/CPE) that has connection for WiFi antenna of type N male. It can be connected to all types of outdoor antennas that have a female N-connector. Notable for having a built-in LAN/WAN RJ45 type port that allows PoE power.

It can also be used in router mode, access or WISP or WiFi client. It has an antenna connector type N (female), and power supply 12v DC 220v or input for PoE. It is connected via an Ethernet cable (not included) and can be configured through the Web interface. Its transmission power is up to 27 dBm or 500 MW.

This tube2h CPE has the advantage bought with Loco M2 and the N828 of carrying an antenna connector that allows by means of a cable to adapt it to directional antennas like the Yagi or the parabolic WIFI AGA2424T.

CPE/AP WiFi Alfa Network Tube2H Router for outdoor PoE client

In Stock 53.00 EUR-BUY NOW!!!

Quick View New

CPE/AP WiFi Alfa Network Tube2H Router…

FREE Shipping!! The Alfa NEtwork Tube2H is an outdoor bridge (AP/CPE) that has connection for WiFi antenna of type N male. It can be connected to all types of outdoor antennas that have a female N-connector. Notable for having a built-in LAN/WAN RJ45 type port that allows PoE power.

 4-Plug WiFi repeater

 The Universal WiFi repeater is a WiFi repeater router is installed on any electrical outlet. Multiple WIFI relays can be installed to provide coverage for all rooms and floors of the house.

A WiFi repeater must be located in the right place to get the best performance. You find it difficult. To find the correct location for the repeater it carries a LED indicator to find the best location for the repeater and get the maximum bandwidth and range.
It works with any wireless router. The Eminent WiFi Repeater uses the 300N standard. This standard is compatible with all common routers. This will make the WiFi repeater universal application.

The Eminent repeater router also functions as an AP access point. An access point converts a wired network connection into a wireless signal. You are able to make use of a WiFi signal in places that you could normally use a cable connection only.

Displaying 1-2 of 2 items
  • RRepetidor WIFI Universal 300Mbps amplifier Coverage AP Client LED indicatorRápidaNUEVO View
    In Stock-19.80 EUR-BUY NOW!!

    Easy connection via WPS button. 300Mbps WIFI repeater very powerful. Universal LAN/WAN port and compatible with all router. Repeater, WIFI client and router as AP access point.

     5-Conclusion

If you are clear and want to buy a repeater WiFi here we put the link to buy long-range wifi in Siliceo online shop the best CPE WiFi 2017 that you can buy online shop

Always choose a repeater that is very easy to install. One way to make sure is to first buy a WIFi antenna panel with 10 meters of USB cable and after testing it for several days and check that we can establish a stable long distance connection, we can buy a OPENWRT repeater compatible router for Attach it to the panel antenna.

Solution to problems of WiFi connection of mobile, tablet and laptops. WiFi USB antennas for Android tablets.

If you are a user who prefers mobile devices like smartphones and tablets, to connect to Internet via WiFi, surely more than once you have had problems of WiFi coverage and the connection has been cut.

When we have problems of WiFi reach on our computer we can solve it easily by connecting a powerful external antenna by USB. At SILICEO ONLINE store there is a long repertoire of the best powerful USB antennas for long range. But, in general, the WiFi antennas of the mobiles are internal and of very little scope, for this reason it is almost impossible to connect to a WiFi network that is outside the building, even on many occasions we cannot connect to the router that is in the ground floor.

1.   WiFi Antennas for Android tablet, such as improving the WiFi reception of the mobile phone or tablet by USB.
2.  Effective solution to the problem of WiFi coverage of the mobile or tablet.
3. Solution to problems of WiFi coverage in hotels or holiday apartments.
4. Conclusion. WiFi coverage is essential throughout our environment

1. WiFi Antennas for Android tablet, such as improving the WiFi reception of the mobile phone or tablet by USB.

If you are in one of these situations in which you try to connect to a WiFi network but the signal arrives very weak to your mobile or Android Tablet, sure you have thought of installing a more powerful WiFi antenna by the USB input of the phone.

The phones have a micro USB connector, so we need an antenna that can plug in there, but the truth is that in the market, for now, do not exist.

Some Android tablets carry a normal USB 2.0 plug, but most often they use micro USB connector, so to connect any peripheral such as a mouse, keyboard, or WiFi USB antenna is required a micro USB to USB cable adapter.

It should be taken into account that some tablets carry the load connector different to the micro USB Host OTG, but others are loaded by the same micro USB so if we connect any peripheral only we can use it while the tablet does not need to reload.

If we need a micro-USB to USB Adapter cable we can buy online this which is very cheap with free shipping.

www.siliceo.es

USB connector Cable to micro USB tablet.

1.40 EUR Free Shipping

Buy NOW!   >>>

As we have explained Yes you can connect any long-range WiFi USB antenna to an Android Tablet or mobile, but there is a difficult technical problem solution in relation to the WiFi antenna drivers for USB OTG for Android. As Andorid is a closed system that lelva all the drivers compiled from the factory and does not allow to add new software or drivers it is necessary that the compatibility drivers for WiFi chip are installed in the factory tablet. All the tablets that carry a WiFi chip installed also carry the module or driver to work on Android. So if the Tablet manufacturer tells us that chip WiFi leads we can install a more powerful antenna that takes that same WiFi chip.

For example we have tried many Tablet that carry chip RT3070 or chip RTL8188, so if we know for sure that ours takes one of those chip can put a more powerful external WiFi antenna and a more gain antenna that gets our Tablet ll Long distance egue to connect via WiFi.

There are many other USB WiFi antenna chip for mobile, so if luckily yours has a WiFi chip that you know for sure which is you can find that chip in this browser chip WiFi antennas and if you find you can install one with that chip that will be recognized by the TA Bleta and it will work.

But the truth is that, although it can be done, and the restless users who like to experiment have succeeded, if the problem of WiFi connection is only presented to us at home there are much simpler solutions that work in 100% of the cases.

2. Effective solution to the problem of WiFi coverage of the mobile or tablet.

In another article we have explained widely how to improve the WiFi coverage of a house or office, changing the location of the router, improving the antennas, etc.

It is also highly recommended to use WiFi plug-in relays like these. These economic devices act by extending the coverage of the WiFi of the house and allowing to connect phones, televisions and computers in rooms that previously did not reach WiFi coverage.

www.siliceo.es
300Mbps plug-in WiFi repeater

But there is a device that is even more effective. Suppose we have a house with a router in the central living room that gives good coverage to the whole house, but on the other side of the garden, at 40 meters we have an office we use to watch TV, use the laptop to work and mobile. If you do not get WiFi coverage or cut frequently we can install a CPE WiFi with long-range antenna.

There are several very strong and powerful CPE models, which can be placed both indoors and in the street, as they are waterproof and water resistant. The best known are the Nanostation Ubiquiti, and the CPE 300Mbps of Melon N801 and N828

The price is very affordable for the high quality of 14dbi planar antenna and the scope it has. Each unit can be purchased at 48 EUROS

MELON N828 CPE PoE 300mb WIFI AP Router external repeater

Antenna CPE MELON N801 300mBPS
48 EUR Free Shipping

Buy NOW! >>>>

This panel antenna is directional so we can orientate it towards the router of the house. Once connected the CPE will give us cable Internet directly to the computer and also repeat for WiFi for mobile and television. No doubt this is the definitive solution to problems of WiFi coverage to parts of the house remote and frequently used Internet.

WISP CPE antenna wifi repeater client Ubiquiti nanostation m2 CPE LocoM2 Ubiquiti Router WiFi Repeater
58 EUR Free Shipping

Buy NOW! >>

We also recommend this type of CPE with long-range panel antenna to use as receiving antennas on the roof and transmit cable to the house.

3. Solution to problems of WiFi coverage in hotels or holiday apartments.

If we travel a lot and usually work in a hotel, then we can take a portable router with rechargeable battery. This router functions as a WiFi repeater to extend the signal.

Portable ROUTER Battery

If you turn it on and put it in an area of the room with a bit of Cebertura WiFi, what it does is amplify the WiFi signal you receive so you can connect to the Internet with several devices at once. It also has function of Power Bank and Multimedia share to share files from a pendrive or hard drive with several users of the network.

Here you can buy this Melon PW62 Multifunction portable Router:

Router with portable battery lithium 7800mAh USB WIFI Repeater

24.30 EUR-Free Shipping

Buy NOW! >>

Features of portable router WiFI Melon PW62:

  • Power Bank 7800mAh. High capacity rechargeable lithium battery.
  • WiFI Router – Wan Port (DHCP, ADSL, static IP, LAN port) WAN and LAN automatic.
  • Multimedia Share
  • Wireless Storage
WiFi Router Pw62 to give WiFi coverage to tablet and mobile.

Using this PW62 portable multi-function router with rechargeable battery will work for hours, and if we plug it into the charger it’ll do 24h a day. From now on, in a hotel or in the office of work that before you had little WiFi signal for the laptop or tablet now you will be able to navigate normally. If you are left with an Ethernet cable office, connect the portable Router by the WAN/LAN automatic DHCP connection and instantly have a new WiFi that shares with your mobile and tablet Internet connection LAN cable.

In extreme cases where there is no WiFi coverage and we want to repeat the Internet from a 4g or 4g SIMde card There is also a router model with portable battery that carries slot SIM slot for Telefoniía 4g/LTE and 3g cards

Router with free Modem USB 4g/3g LTE LT10 hotspot repeater WIFI AP

75.30 EUR Free Shipping

Buy NOW! >>

Features of the portable router with SIM Slot Melon LT10. 

The portable Wi-Fi router for 4g that goes wherever you go. Free 4g Modem MELON LT10.
Specifications:
Network type: LTE-TDD/FDD LTE/GSM/WCDMA/TD-SCDMA/EVDO
CPU: Qualcomm MDM9615
Battery: 2400mAh
Ports: 1 * Micro USB, 1 * USIM standard, 1 * Micro SD
Buttons: 1 * power, 1 * WPS on/OFF, 1 * Reset
T-Flash: Up to 32g
Users: Up to 10
Display: 1.44 inch LED Display
Ports:
1 * MicroUSB
1 * USIM Standard
1 * MicroSD

4. Conclusion. WiFi coverage is essential throughout our environment

We are accustomed to work connected to a WiFi network, and sometimes it is essential to establish WiFi networks for several users in order to share files or work in network. The powerful WiFi antennas are the best solution to work with PC and Windows computers and for tablet and mobile Android we can use all kinds of WiFi repeaters and portable router. Now we can take WiFi internet everywhere

For technical queries, budgets or product data you can contact Siliceo Online shop contact >>.

How to install a long range WiFi outdoor antenna to connect up to 3 kilometers away and repeat inside home with a neutral router

In this practical case we will configure a long-range antenna with 14DBI and 300Mbps of download speed to establish a connection 3 km away and to have Internet at home with a neutral router. The model we have chosen is the CPE Melon 801 antenna which has a planar antenna or long range 14dbi panel, waterproof for outdoor and also powered by LAN network cable with PoE.

The CPE (Local client equipment) is a very versatile device because it can work interchangeably like router, AP access point, repeater or WiFi client. The choice of this WiFi CPE antenna model instead of a powerful USB antenna, has been done because it is about installing it on the roof in a tower located about 20 meters from the floor, where a conventional USB antenna does not arrive. When we want to reach a distance as long as 3km the location of the antenna is very important, it is obligatory that there is direct vision and that this at the same height as the transmitter WiFi and directed facing the other antenna.
In this case it is about sharing the Internet from a family home that is in a building 3km of the same height as ours and without barriers along the way. All we need is 2 CPE Melon 801 and a neutral router. The first CPE is placed on the roof of the family house that will emit the WiFi signal. The CPE will be set as repeater mode and the other in the building that will be configured as Client station mode (STA).


The CPE N801 is an ideal WiFi antenna to install on the roof as all circuits and antenna are integrated into a completely waterproof ABS plastic box and can be powered by an RJ45 network cable of 20 meters or more. The advantage of this cable is that at the same time you connect to the router that has Internet by the LAN port to transmit the signal from the router to the antenna, it also makes of electric feeder by means of the PoE system allowing the antenna to work on the roof fed of SDE the router.

The great power of this wifi PoE CPE receiver/transmitter makes it ideal for connecting to networks outside your home. Like for example to repeat a WiFi network of another floor or building, to connect to a public WiFi network of some park from house, to connect to the network of a familiar that lives near, to connect several plants of the same house, to give cover to a large farm or garden and much more that we or Curry using the three possible configuration modes:

-AP mode, WiFi transmitter, access point
-Repeater, bridge or repeater mode
-Client mode, WiFi receiver or station (STA)

This external WiFi antenna comes with a RJ45 network connector and two LAN and one WAN inputs/outputs. It is intended to be connected to any Router, both WAN (receive Internet) and LAN (Internet output) so its installation is simple and easy to configure.

The price is very affordable for the high quality of 14dbi planar antenna and the scope it has. Each unit can be purchased at 48 EUROS

MELON N828 CPE PoE 300mb WIFI AP Router external repeater

Antenna CPE MELON N801 300mBPS
48 EUR Free Shipping

Buy NOW! >>>>

1.-Connect the CPE Melon as a WiFi transmitter, reboot mode

The first step is to locate a LAN output of the router that has Internet in the house that we want to share. The Poe adapter plug is connected to the power supply and a cable from the router’s LAN output to the WAN input of the Poe socket. Then a cable is pulled as long as we need to the roof and connected from the WAN output of the PoE plug to the WAN input of the N801 antenna. This cable will give power to the antenna and will operate with a low consumption completely stable 24h. Of the day.

2.-Connect the CPE Melon as a receiver. Station or client mode.

This connection serves both to receive and repeat the signal of this example that is emitted by connecting to any free or open network that is available.
To receive a long distance WiFi signal we need this CPE N801 that will work as a powerful WiFi antenna for outdoor. It can be installed in the window, terrace or on the wall, but to work long distance to more than 500 meters and up to 3km it is important that this at the same height as the emitter and directed precisely towards that point.
This CPE has a multitude of functions, and when we install it as a WiFi receiver with client mode we can verify that we connect it by LAN output to a PC will give us internet immediately to that computer. In the same way if we installed it inside the house or in the window we can use the Repeater mode and while receiving by WiFi long distance will create a new WiFi network for all the devices that we need. But if we install it on the roof we can not use the Repeater mode because the WiFi network will not arrive if you have to cross several floors down. We remember that the WiFi signal can be easily transmitted in open spaces and horizontally, but with barriers and vertically will not reach our house.
In these cases it is recommended to install a neutral router inside the house that will receive the signal from the roof antenna by LAN cable and create a new WiFi network for the mobiles, computers and tablets that we need. For this work we recommend the OpenWrt neutral router for its great balance quality price, and the OpenWrt configuration interface in Spanish is very easy to handle.
In the case of each CPE Melon N801 is supplied with a POE device unit (Powerline Over Ethernet), this electric plug with WAN and LAN output is used to give power and network connection to the external antenna. To set up the antenna, connect the POE to a mains plug and a cable to the antenna and another to a computer. From the configuration interface of the CPE we choose the mode of use and we can write the password of the WiFi network to which we are going to connect. After saving the settings whenever you let’s light it will start working with that configured network.

3-How to configure the CPE Melon N801

To configure the external long-range CPE Melon N801 antenna, follow a few simple steps detailed in the manual. Once connected to the POE, and connected to a computer via LAN cable, we entered the Web browser and with the Web address http://10.10.10.254 we went to the configuration page and to configure the receiver WiFi we chose the client mode WiFi or Station (STA). Once configured we will have an Ethernet cable receiving the external WiFi connection. Then we can connect that cable to the neutral router to distribute it all over the house.

This long-range dual-polarization 14dbi antenna is capable of connecting to remote WiFi networks up to 3km with very good signal quality received, and also transmits to 300Mbps.


A CPE of these features has several modes of operation: AP/client/Repeater/AP Router/AP Client/Router (WISP). This means that you can use the antenna to connect two point-to-point antennas, to emit as WiFi hotspot access point, to bring the WiFi signal to another point, as a WiFi repeater from another router etc.

4-How a neutral router works to repeat the Internet.

When we want to install a WiFi router that distribute the signal throughout the house we need a neutral router, which is the one that cannot be connected directly to a line of ADSL or optical fiber, since it does not have built-in modem. To give the Internet to these router need to connect by WAN cable to a repeater or switch that has Internet. The neutral routers only work within an Ethernet network already established, as is the case of Launa antenna WiFi receiver by USB or a CPE.

The OpenWRT USB neutral router with 4 antennas 300Mbps silicon is a good option to repeat the Internet and create a WiFi network for the whole house. It has a WAN input and four LAN outputs. The new Mediatek MT7620 processor works with 64MB of RAM and 8 Mb of Flash memory.

Openwrt Router USB MTK7620N 4 antennas Repeater WIFI 300Mbps Router WiFi repeater with USBRouter OpenWRT SILICEO
€46 Free Shipping

Buy OpenWRT Siliceo Router > >

This router can be connected to the CPE antenna by RJ45 cable. The neutral router repeats the connection caught in the street by the CPE Melon.

In this tutorial we have described the installation with the CPE Melo N801, but you can also make the same connection with the CPE nanostation LocoM2 of Ubiquiti. Ubiquiti CPE can also be used to link long-distance WiFI and are also compatible with the neutral Router.

Here you can commprar the complete CPE pack Ubiquiti LocoM2 + Neutral router SILICEO

KIT WIFI Ubiquiti nanostation LocoM2 + neutral router Open-Wrt CPE LocoM2 Ubiquiti + WiFi repeater Router with USB OpenWRT SILICEO
98 EUR Free Shipping

Buy NOW! >>

To conclude we recommend this type of CPE to use them as receiving antennas for intermediate distances of 500 meters at 3 km because the PoE cable power allows a remote location of the house or office of the or that allow WiFi antennas by USB. If we want links to more distance like 5 km, 10 km or up to 15 km will be necessary the use of Yagi or parabolic antennas as explained in this other article of links WiFi long distance of up to 15km.